The P/T Calcs app is a REFRIGERANT CHARGING CALCULATOR that allows HVAC technicians to perform superheat and subcool refrigerant charge calculations on-the-fly. This app includes pressure/temperature data for over 75 refrigerants.
The following is a list of features:
1. This app also reads the values from the PDI PT655 Meter via Bluetooth inputs the values into the pressure temperature tables to provide you with the correct diagnosis of the refrigeration equipment you are testing.
2. Perform superheat refrigerant charge calculations for 75 different refrigerants. Input the indoor wet-bulb and outdoor dry-bulb temps. to get the target superheat temperature. Then, specify the suction line temperature and pressure to get the actual superheat temperature. The difference tells you whether to charge or not.
3. Perform subcool refrigerant charge calculations for 75 different refrigerants. Input the indoor wet-bulb and outdoor dry-bulb temps. to get the target subcool temperature. Then, specify the liquid line temperature and pressure to get the actual subcool temperature. The difference tells you whether to charge or not.
4. Use an interactive slider control to increase or decrease all values and immediately observe calculated results. Also, the slider control allows for "incremental" changes so you can ever-so-slightly change values to observe newly calculated results.
5. Specify atmospheric pressure (other than standard 14.7 psi) so that calculated pressures are adjusted for high elevations like those in Denver and elsewhere.
6. Customize input types so that you can specify manufacturer-specified target superheat/subcool or input indoor dry-bulb/indoor relative humidity in place of indoor wet-bulb temperature.
7. Send an email of all inputs and results with custom message
8. Display input and result values in either English or Metric units